Looking for the best Metric Taps And Drills? We have something to offer you!.To assist you find the right product for the perfect inverter, we’ve created the following list with our Top Metric Taps And Drills.
Top 10 Best Metric Taps And Drills – Review
Comparison Chart of Top 10 Best Metric Taps And Drills
1. Accusize Industrial Tools 18 Pc Hss Tap and Drill Set, Metric, 0001-0052
- HSS Fully Ground
- Size of Drills: 2.05mm, 2.50mm, 2.90mm, 3.30mm, 4.20mm, 5.00mm, 6.70mm, 8.50mm, 10.20mm.
- Size of Taps: M2.5X0.45, M3.0X0.50, M3.5X0.60, M4.0X0.70, M5.0X0.80, M6.0X1.00, M8.0X1.25, M10.0X1.50, M12.0X1.75.
- 18pcs Metric Tap & Drill Set
2. aiyun 6 Pack Titanium Combination Drill Tap Bits Set, Thread Tap Drill Bits Set M3-M10 Metric Drill Tap Set
- [Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you
- [What You Will Have] Set of 6 metric tap and drill bit M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately
- [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency
- [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread
3. 6 Packs Combination Drill & Taps Bit Set, Screw Tapping in 6 Sizes Metric Thread M3 M4 M5 M6 M8 M10 with Nano Blue Coating， Hex Shank
- 【Perfect size】Our Drill Tap Bits Set contains six sizes, namely Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5，Shank:1/4 inch (6.35mm ) hex shank. It can be used for tapping various threads, making your work more convenient.Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance.
- 【Drilling and tapping in one】Fast replacement composite cone, uses drill edged principle.Complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency.
- 【Quick Change】 1/4 inch hex shank fits into power tools more easily and securely.
- 【High quality material】Made of high quality HSS with nano blue coating, high hardness, anti-rust, has excellent for capability and durability.This drill bits set can quickly drill, tap, deburr and countersink.
4. Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool
- Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
- Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
- Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
- Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
5. BAYTORY 7Pcs Titanium Combination Drill and Tap Set, Metric Thread HSS M3-M10 Screw Tapping Bit Tool 1/4″ Hex Shank (Titanium Coated 7 Pcs)
- Easy to Use: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread.
- Shape: 7pcs 1/4 inch Shank Titanium Combination Drill and Tap Set, Metric M3*0.5mm (2pcs), M4*0.7mm, M5*0.8mm, M6*1.0mm, M8*1.25mm, M10*1.5mm, It is not easy to shake and can drill accurately.
- Material: HSS 4341 (high-speed steel) + titanium coating Classic HSS construction with titanium coating for capability and durability. Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency
- Multi-purpose: These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, wood, plastic, iron, and so on, They’re sharp, and easy to use. Fit Electric hand drill, impact drill, bench drill and tap machines.
6. Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool
- These micro taps mainly used for clocks and watches, and low hardness of wood and soft metal hole processing.
- 10 Different Sizes: M1, M1.2, M1.4, M1.6, M1.7, M1.8, M2, M2.5, M3, M3.5 (coarse thread) for tapping various threads.
- Standard metric thread design, clear and tidy, no burr, provide rapid chip removal for efficient threading.
- With these machine hand taps, you will have a smooth tapping experience.
7. HIDOTOL Titanium Combination Drill and Tap Bits Set with Quick Change Adapter, 13 PC SAE/Metric Screw Taps, 3-in-1 Bit Tool for Drilling, Tapping and Countersinking
- Self-centering Design – Self-centering point, do not need assistant center drilling or center punching.
- Widely Application – Taps suitable for drilling, tapping, deburring on wood, plastic, iron, aluminum, copper, soft metal, etc.
- High Efficiency – 1/4 inch hex shank fit into most power tools, such as electric drill, bench drill, drill press and Tapping machine.
- High Quality Material – High speed steel provide good wear resistance and cutting performance. Titanium coating provide longer bit life by resisting heat buildup.
8. AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking
- 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching
- Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
- Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
- Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency.
9. Greenlee DTAPKITM Drill/Tap/Countersink Set, Metric, 6 Pc, M3 – M10
- Country of manufacture: China
- Manufacturer: Greenlee
- Power Cutting & Sawing
10. OFNMY 8PCS Tap Wrench Set, Metric Tap Set, Tap Machine Hand Screw Thread Taps Set Thread Metric Plug Tap Drill Bits Set M3 M4 M5 M6 M8 M10 M12 with Adjustable Tap Reamer Wrench Hardware Tool 1/16-1/2″
- 【Material】OFNMY 8PCS metric tap set made of excellent high speed steel, high hardness with good durability, performed well in tapping, quick with high accuracy. suitable for soft metal, such as aluminum plate, iron plate. high speed steel tapping
- 【Size & Length】Metric tap size: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25, M10*1.5, M12*1.75, Standard Coarse Thread Tap; Length of Metric tap :46mm/1.81” (M3),52mm/2.05” (M4),60mm/2.36” (M5),62mm/2.44” (M6),70mm/2.76” (M8),75mm/2.95” (M10),82mm/3.23” (M12),(Approx.) and the Length of straight tap wrench is 196mm/ 7.72in
- 【Adjustable Tap Wrench】 The adjustable metal tap reamer wrench designed to be used with taps or reamers, handles are long to provide more leverage than T-Handle wrenches, used for holding larger taps and in open spaces where there is a room to turn the tap wrenches
- 【7PCS Spiral Pointed Tap】A perfect spiral pointed tap set that does a perfect job in tapping metals, woods or plastics, simultaneous chip removal and tapping. the machine hand screw thread taps set have different 7 sized spiral pointed taps for threading a circular tube, down rows of pins to suit your various needs